Xerox Phaser 5500 User Manual page 59
Xerox phaser laser printer 5500 user guide
Hide thumbs
Also See for Phaser 5500:
- Service documentation (59 pages) ,
- Maintenance manual (50 pages) ,
- Supplementary manual (9 pages)
Table of Contents
Advertisement
■
Place Letter, A4, Executive, and B5 JIS paper long-edge feed into the tray.
■
Place the side to be printed first (page 1) faceup.
Place pre-punched paper with the holes toward the right side of the tray.
■
■
Place letterhead (or the top of the page) toward the front of the tray.
3.
Push the tray completely into the printer.
4.
If prompted at the printer's front panel, press the OK button to accept the paper size and
type that are highlighted. If you have changed the paper size or type, do the following:
a.
Select Change, then press the OK button.
b.
Select the paper size or type, then press the OK button to save your selection.
5.
In the printer driver, select either the paper type or Tray 6 as the paper source.
XEROX
Phaser® 5500 Laser Printer
2-27
Basic Printing
5500-255
5500-115
Advertisement
Table of Contents
Troubleshooting
