4.
Specify the size of the paper by doing the following:
a.
In the front panel menus, select
b.
Select
Paper Handling
c.
Tray [2 - 5]
Select
d.
Auto Sensed,
Select
e.
If you selected Custom, specify the width and height of the paper. Select
Width, press the OK button, scroll to the width of the paper, then press the OK
button. Select
Custom
then press the OK button.
5.
Open Door A.
Warning
Use caution; some components inside Door A may be hot.
6.
Pull the jammed paper out of the printer. If necessary, press the green handle to move the
paper to make it easier to remove. Confirm that all paper fragments are removed.
Printer
Setup, then press the OK button.
Setup, then press the OK button.
Setup, then press the OK button.
Custom, or a listed paper size, then press the OK button.
Height, press the OK button, scroll to the height of the paper,
Phaser® 5500 Laser Printer
4-29
Paper Jams
Custom
5500-001
5500-002