Xerox 4050 Message Manual page 41

XEROX DOCUPRINT IPS MESSAGES GUIDE
08-179 L E jam at third party cross module.
There is a paper jam in the indicated area.
Action Clear the jam from the area using the steps provided by the system
and continue the job. (Refer to the Xerox DocuPrint 96/4635/180 IPS
Troubleshooting Guide for the procedure.)
08-180-1 L E jam at tray 3 takeaway rol Q857.
The leading edge of the sheet of paper did not arrive at the tray 3 feed
sensor in time, causing a jam.
Action Open tray 3, clear the feeder, clear area 11, and retry the operation.
(Refer to the Xerox DocuPrint 96/4635/180 IPS Troubleshooting
Guide for the procedure.)
08-180-2 L E jam at tray 4 takeaway rol Q857.
The leading edge of the sheet of paper did not arrive at the tray 4 feed
sensor in time, causing a jam.
Action Open tray 4, clear the feeder, clear area 11, and retry the operation.
(Refer to the Xerox DocuPrint 96/4635/180 IPS Troubleshooting
Guide for the procedure.)
08-181-1 L E jam at tray 3 takeaway rol Q857.
The leading edge of the sheet of paper did not arrive at the tray 3 feed
sensor in time, causing a jam.
Action Open tray 3, clear the feeder, clear area 11, and retry the operation.
(Refer to the Xerox DocuPrint 96/4635/180 IPS Troubleshooting
Guide for the procedure.)
08-181-2 L E jam at tray 4 takeaway rol Q857.
The leading edge of the sheet of paper did not arrive at the tray 4 feed
sensor in time, causing a jam.
Action Open tray 4, clear the feeder, clear area 11, and retry the operation.
(Refer to the Xerox DocuPrint 96/4635/180 IPS Troubleshooting
Guide for the procedure.)
08-182-1 T E jam at tray 3 takeaway rol Q857.
The trailing edge of the sheet of paper did not leave the tray 3 feed
sensor in time, causing a jam.
Action Open the vertical transport door or tray 3, clear area 11, and close
the door. Open tray 4, clear the feeder, close the tray, and retry the
operation. (Refer to the Xerox DocuPrint 96/4635/180 IPS
Troubleshooting Guide for the procedure.)
DOCUPRINT 96/4635/180 IPS MESSAGES
2-29