Xerox 4050 Message Manual page 21

XEROX DOCUPRINT IPS MESSAGES GUIDE
03-343 ROS EXPOS$REF turnaround failure.
The MIN SLB/RDR board to raster output scanner (ROS) turnaround
test failed.
Action Select the Fault List icon on the printer control console touch screen.
Then touch the [Clear] button to clear the codes. If the error persists,
contact your service representative.
03-344 SLBRDA-EPMD turnaround failure.
The MIN SLBRDA board to EPMD board turnaround test failed.
Action Select the Fault List icon on the printer control console touch screen.
Then touch the [Clear] button to clear the codes. If the error persists,
contact your service representative.
03-345 FSN1 stepper A turnaround failure.
The FSN Stepper board A turnaround test failed. This error is logged
by the system.
Action No action required.
03-346 FSN1 stepper B turnaround failure.
The FSN Stepper board B turnaround test failed. This error is logged
by the system.
Action No action required.
03-361 EDN NVM battery failed.
The EDN Core board battery failed.
Action No action required.
03-362 EDN NVM not initialized.
The NVM values on the EDN Core board are not valid.
Action Contact your service representative.
03-370 SLB/RDR requiring software reset.
An internal failure occurred in SLB/RDR board.
Action Select the Fault List icon on the printer control console touch screen.
Then touch the [Clear] button to clear the codes.
03-371 EDN needs softwreset hardwcaused.
EDN Core board detected a potential hardware problem that required
a software reset.
Action Select the Fault List icon on the printer control console touch screen.
Then touch the [Clear] button to clear the codes.
DOCUPRINT 96/4635/180 IPS MESSAGES
2-9