Xerox PHASER 3435 User Manual page 48

Message Meaning
LSU Motor Error A problem has
occurred in the LSU
Cycle Power
(Laser Scanning
Unit).
Main Motor There is a problem
Locked in the main motor.
Open Heat Error There is a problem
in the fuser unit.
Cycle Power
Over Heat Error There is a problem
in the fuser unit.
Cycle Power
Paper Jam 0 Paper has jammed
in the feeding area
Open/Close Door
of the tray.
Paper Jam 1 Paper has jammed
in the fuser area.
Open/Close Door
Paper Jam 2 Paper has jammed
in the paper exit
Check Inside
area.
The printer is
printing jobs using
Printing...
the displayed
language.
The printer is on-line
Ready
and ready to printer.
Self Diagnostic The LSU(Laser
LSU Scanning Unit) in
your printer is
checking some
problems detected.
Self Diagnostic The engine in your
Temperature printer is checking
some problems
detected.
The printer is on
Sleeping...
power save mode.
Suggested solutions
Unplug the power
cord and plug it back
inches. If the
problem persists,
please call for
service.
Open and then close
the front cover.
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
Unplug the power
cord and plug it back
in. If the problem
persists, please call
for service.
Clear the jam. See
page 9.1 and
page 9.1.
Clear the jam. See
page 9.3.
Clear the jam. See
page 9.3.
Complete your
printing.
Use your printer.
Please wait a few
minutes.
Please wait a few
minutes.
When data is
received, it switches
to on-line
automatically.
9.7
Message
Tray 1 There is no paper in
the tray 1.
Paper Empty
Tray 2 There is no paper in
the optional tray 2.
Paper Empty
<Troubleshooting>
Meaning Suggested solutions
Load paper in the
tray 1. See page 5.5.
Load paper in the
optional tray 2. See
page 5.5.