Table of Contents
Advertisement
Important Safety Instructions
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all Instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.
Do not defeat the safety purpose of the polarized
or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
Only use attachmenVaccessories specified by the manufacturer.
Use only the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution when moving the carVapparatus
combination to avoid injury from tip-over.
Unplug this apparatus during lightning stonns or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing
is
required when the apparatus
has been damaged in any way, such as power-supply cord or plug
is
damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate nonnally, or has been dropped.
Power Sources: This product should be connected to a power supply only of the type
described in these operating instructions, or as marked on the unit.
Internal/External Voltage Selectors: Internal or external voltage selector switches, if any, should only be reset and re-
equipped with a proper plug for alternative voltage by a qualified service technician. Do not attempt to alter this
yourself.
Water and Moisture: This product should be kept away from direct contact with liquids. The apparatus shall not be
exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the
apparatus.
Caution:
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain
readily operable.
Protective earthing terminal: The apparatus should be connected to a mains socket outlet with a protective
earthing connection.
•
Finland (Suomi): Laite on liitettava suojamaadoituskoskettimilla varustettuun pistorasiaan.
•
Norway (Norge): Apparatet mll tilkoples jordet stikkontakt.
•
Sweden (Sverige): Apparaten skall anslutas till jordat uttag.
This symbol means the equipment is a Class II or double-insulated electrical appliance. It has been
designed in such a way that it does not require a safety connection to electrical earth. .
Do not install this equipment in a confined or
'boxed-in'
space such as a bookcase or similar unit, and maintain good
ventilation conditions. The ventilation should not be
impeded
by covering the ventilation openings with items such as
newspaper, tablecloths, curtains, etc.
This apparatus is for professional use only.
When moving or not using the appliance, secure the power cord (e.g., wrap it with a cable tie). Be careful not to
damage the power cord. Before using it again, make sure the power cord has not been damaged. If the power cord has
been damaged at all, bring the unit and cord to a qualified service technician for repair or replacement as specified by
the manufacturer.
Warning:
Excessive sound pressure (high volumes) from headphones can cause hearing loss.
Warning:
Please refer to any important information (e.g., electrical, safety, etc.) printed on the exterior bottom
enclosure or rear panel before installing or operating the product.
Service Instructions
•
•
Disconnect power cord before servicing .
Replace critical components
~
only with factory parts or recommended equivalents
.
•
For AC
line
powered units
-
Before returning repaired unit to user, use an ohmmeter to measure from both AC plug
blades to all exposed metal parts. The resistance should be more than
2,000,000
ohms.
Safety Notices
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE ANY COVER. NO USER- SERVICEABLE PARTS
INSIDE.
REFER
SERVICING
TO
QUALIFIED
SERVICE
PERSONNEL ONLY.
DANGEROUS VOLTAGE:
The lightning flash with arrowhead symbol within the equilateral triangle
is
intended to alert the user to the presence of un-insulated 'dangerous voltage• within the product's
enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
6
&
SA 1965
Advertisement
Table of Contents
