Companion Monitor; Graphical Presentation; Device Management; Selecting The Current Device - Xerox Phaser 3100MFP/S User Manual

Phaser 3100MFP/S

Companion Monitor

Graphical presentation

Run the application by clicking on the X
M icon located on your desktop or from the menu
ONITOR
S >A P > X
TART LL ROGRAMS
P 3100 MFP > C
HASER OMPANION
From this screen you can monitor the information or
configure your machine from the tabs:
• D : Displays the list of devices
EVICE SELECTION
managed by the PC.
• C : Presents the machine screen (USB
OMPANION
connection only).
• C : Displays the consumables status.
ONSUMABLES

Device management

This tab shows the list of devices managed by the PC.

Selecting the current device

Only one device at a time may be connected to the PC.
The current device may be selected by clicking on the
radio button corresponding to the device.
C
EROX OMPANION
C S >
EROX OMPANION UITE
M .
ONITOR

Status of the connection

The status of the connection between the current device
and the PC is indicated by a colour. The following table
defines the possible states of the connection.
Colour
Yellow
Connection in progress.
Green
Connection established.
The PC cannot connect to the device.
Red
Check the USB connection.

Device parameters

1 Select a device by clicking on its line in the list and
click on P
ROPERTIES
parameters to be applied for this device when you
use the S T
CAN
2 Select the desired scan M
menu.
- 42 -
State
to configure the scanning
function.
O
in the drop-down
ODE