Parameters/Setup; Language; Technical Parameters; Printing The Functions Guide - Xerox Phaser 3100MFP/S User Manual

Parameters/
Setup
You can setup your machine as you like depending on the
use. In this chapter you will find descriptions of the
functions.
You can print the functions guide and the current setup of
your machine.
Your machine is continuously being
updated, new functions are regularly
made available.
To benefit,
Note www.xerox.com. You can also use the
update function available with the
Xerox Companion Suite software to
download the latest online updates
(see Firmware update, page 49).

Language

This setting enables you to choose the menu language of
your choice. By default, the machine is set to English.
To select the language:
203 - SETUP / GEOGRAPHICAL / LANGUAGE
1 Press , enter 203 using the keypad.
2 Select the required language using
press the OK key to confirm.
3 To exit this menu, press

Technical Parameters

As delivered your machine is preset by default. However,
you may adjust it to meet your requirements by resetting
the technical parameters.
To set the technical parameters:
1 Press , enter 29 using the keypad.
2 Select the desired parameter and confirm with OK.
3 With the keys
settings by following the table below and press OK.
visit our website
and , then
.
29 - SETUP / TECHNICALS
or , modify the parameter
Parameter
8 - Eco energy Choosing the printer standby
delay: the printer will switch to
standby after a delay (in minutes)
of NON-operation or during the
period of time of your choice.
Note: you can also access this
parameter by pressing the
80 - Toner save Makes printing lighter to save toner
cartridge ink.
90 - RAW Port RAW network print port
connection.
91 - Printer error Time-out before document being
timeout
printed is deleted following a print
error in PC print mode.
92 - Printer wait Wait time-out for data from PC
timeout
before the task is deleted in PC
print.
Page size change. This parameter
93 - Replace format
allows you to print a LETTER size
document on A4 pages using the
LETTER/A4 setting.
96 - NBR. WEP Number of WEP keys allowed
Keys
(from 1 to 4).

Printing the functions guide

Printing is not possible on A5 (or
Important
Statement) paper size.
Press , enter 51 using the keypad.
The printing of the functions guide starts.
You can also access the PRINT menu
Note
by pressing the

Print the list of setups

Printing is not possible on A5 (or
Important
Statement) paper size.
To print the list of setups:
Press , enter 56 using the keypad.
- 25 -
Phaser 3100MFP/S
Description
key from the idle screen.
51 - PRINT / FUNCTIONS LIST
button.
56 - PRINT / SETUP