Table of Contents
Advertisement
4. Make sure your 55-gallon (208-liter) supply drum is
located on flat, stable ground. Carefully lift the barrel
mount onto the top of the drum (Figure 45). Make
sure the unit rests between the bung holes in the
drum cover.
CAUTION
DO NOT attempt to lift the barrel mount by yourself.
ALWAYS have a second person help lift the unit.
ALWAYS use proper lifting techniques to avoid injury.
Figure 45. Barrel Mount Placement
5. Make sure the end of the barrel mount opposite the
thumb screw is pressed flush against the drum cover,
and turn the thumb screw to secure the barrel mount
to the drum (Figure 46).
PAGE 36 — WSC55 SERIES CHEMICAL SPRAY CART • OPERATION AND PARTS MANUAL — REV. #1 (08/30/19)
10
15
5
20
0
psi
bar
THUMB
SCREW
Figure 46. Secure Barrel Mount to Drum
6. Locate the bung holes on top of the drum. Break the
bung hole cap seals (if necessary) and unscrew the
bungs (plugs) to remove.
OPTIONS
Advertisement
Table of Contents
