Table of Contents
Advertisement
An engine-driven, onboard air compressor is provided for
clearing liquid from the spray system after use. Figure 9
shows the location of the compressor's basic components.
Listed below is a brief explanation of each component.
1. Clutch Cable — Connects the compressor control
lever to the compressor. Attaches to the compressor
clutch.
2. Compressor Control Lever — Mounted on the left
handlebar. Engages the air compressor. Push forward
to engage the compressor, and pull backward to
disengage the compressor.
3. Compressor Port — Attach the main hose here
to clear liquid from the spray assembly. See the
Operation section for more information.
4. Dipstick/Oil Filler Cap — Remove to determine if
compressor oil is low. Add oil through this port as
recommended in Table 7.
5. Oil Drain Bolt — Remove to drain oil from the
compressor crankcase.
6. Clutch — Attaches to the clutch cable to provide
compressor control.
PAGE 22 — WSC55 SERIES CHEMICAL SPRAY CART • OPERATION AND PARTS MANUAL — REV. #1 (08/30/19)
COMPONENTS (COMPRESSOR)
1
6
Figure 9. Compressor Components
2
4
3
5
Advertisement
Table of Contents
