4. Locate the bung holes on top of the supply container(s).
Break the bung hole cap seals (if necessary) and
unscrew the bungs (plugs) to remove. See Figure 14.
DRUM
COVER
Figure 14. Open Supply Container
5. Insert the suction tube (the larger of the two tubes)
into the top of the supply container(s). If the bung holes
are different sizes, be sure to place the suction tube
into the larger hole. See Figure 15.
WSC55 SERIES CHEMICAL SPRAY CART • OPERATION AND PARTS MANUAL — REV. #1 (08/30/19) — PAGE 25
BUNG
HOLES
BUNGS
(UNSCREW)
RETURN
TUBE
SMALLER
Figure 15. Tube Installation
6. Insert the return tube (the smaller of the two tubes)
into the top of the supply container(s). If the bung holes
are different sizes, be sure to place the return tube into
the smaller hole (Figure 15).
SET-UP
SUCTION
TUBE
LARGER
HOLE
HOLE