MULTIQUIP Whiteman WSC55 Series Operation And Parts Manual page 30

5. Slowly pull the recoil starter grip (Figure 26) until
resistance is felt, then pull briskly and smoothly to
start the engine. Gently return the starter grip to its
original position.
STARTER GRIP
Figure 26. Starter Grip
OPERATION
Steering and Parking
1. Use the gripped control handles at the rear of the spray
cart to steer the unit (Figure 27).
STEERING
CONTROL
HANDLES
Figure 27. Steering Control Handles
2. Park the spray cart near the application area and
engage the parking brake (Figure 28) to prevent the
unit from rolling during use.
PAGE 30 — WSC55 SERIES CHEMICAL SPRAY CART • OPERATION AND PARTS MANUAL — REV. #1 (08/30/19)
Figure 28. Engage Parking Brake
Control Levers
Once the engine has been started, use the control levers
located at the rear of the spray cart (Figure 29) to engage
the pump and compressor. The right lever engages the
pump, and the left lever engages the compressor.
COMPRESSOR
CONTROL
LEVER
Figure 29. Pump and Compressor
Control Levers
OPERATION
PUMP
CONTROL
LEVER