Printer Menu - Xerox Wide Format 510DP Operator's Manual

OFF-LINE SETUP MENU

Printer Menu

Option
AUDIBLE INDICATORS
TIMERS
PRINTER ADJUSTMENTS
FINISHER SETTINGS
20
The Printer Menu allows you to control the operation of the printer.
This menu contains six options. The table below describes the
Printer Menu options and their sub-options.
Table 1. Printer Menu options
Sub-option
KEYPRESS
ALARM
READY TO POWER SAVER
POWER SAVER TO REST
DENSITY
FINISHER CONFIG TYPE
Function
Enables or disables an audible beeper when a
control panel key is pressed.
Settings: ON and OFF
Default: ON
Enables or disables an audible beeper when
the printer experiences a condition requiring
immediate attention.
Settings: ON and OFF
Default: ON
Controls the length of time the printer will
remain idle before entering power saver
mode.
Settings: 5 to 50 minutes in 5-minute intervals
Default: 50 minutes
NOTE: A value of 0 prevents the printer from
entering power saver mode.
Controls the length of time the printer will
remain idle in power saver mode before
entering rest mode.
Settings: 15 to 150 minutes in 15-minute
intervals
Default: 150 minutes
NOTE: A value of 0 prevents the printer from
entering rest mode.
Increases or decreases the print density.
Settings: 0 (lightest) to 10 (darkest)
Default: 5
Specifies the folder configuration type.
Settings: NONE (no finisher) and 003
(Generic Finisher Interface)
Default: NONE
XEROX WIDE FORMAT 510dp OPERATOR MANUAL