Localization; Control Panel; Display Units - Xerox 5101 User Manual

Localization

The LOCALIZATION option of the CONFIGURATION menu sets the language in which
messages are displayed. It also controls whether measurements are displayed in English or
metric units.
To set the display language or display units:
1. Press the Menu key. The MAIN MENU screen is displayed.
2. Press the Enter key to select CONFIGURATION. The CONFIGURATION menu
screen is displayed.
3. Press the Enter key to select LOCALIZATION. The LOCALIZATION screen is
displayed. Below is an example of the LOCALIZATION screen.
LANGUAGE:

DISPLAY UNITS:

4. Press the Previous or Next key to highlight LANGUAGE or DISPLAY UNITS.
5. Press the Enter key to select the highlighted option.
6. Press the Previous or Next key to highlight the desired setting for the option.
The choices for LANGUAGE are ENGLISH, SPANISH, FRENCH, ITALIAN,
GERMAN, RUSSIAN, or PORTUGUESE. ENGLISH is the default setting.
The choices for DISPLAY UNITS are INCHES or MM (MILLIMETERS). INCHES is
the default setting.
7. Press the Enter key to select the highlighted setting.
8. Repeat steps 4 through 6 to change the remaining setting, if desired.
9. Press the Exit key to return to the CONFIGURATION menu screen.

Control Panel

The CONTROL PANEL option of the CONFIGURATION menu controls whether the beeper is
used for the key click and invalid entry beeps. It also allows selection of the font display style and
the default mode of operation for the Wide Format Copy System.
To set the beeper, text style or default operating mode:
1. Press the Menu key. The MAIN MENU screen is displayed.
2. Press the Enter key to select CONFIGURATION. The CONFIGURATION menu
screen is displayed.
3. Press the Next key to select CONTROL PANEL.
4. Press the Enter key to select CONTROL PANEL. The CONTROL PANEL screen is
displayed. Below is an example of the CONTROL PANEL screen.
Wide Format Copy System User Guide
LOCALIZATION
ENGLISH
Localization Screen
10 Main Menu
101