Xerox 5101 User Manual page 31

ENTER (25.0 – 400.0):
2. Enter a reduction/enlargement between 25 and 400. You can select any value
between these limits in 0.1% increments.
3. Press the Enter key to confirm your choice and return to the READY screen. The
READY screen now displays the new reduction/enlargement percentage.
NOTE: Pressing the Exit key rejects the choice and retains the previous setting.
Preset
Preset (factory default) allows you to select a predefined reduction or enlargement percentage.
To select the Preset mode:
1. Press the key under Reduce/Enlarge until the Preset indicator lamp illuminates.
The PRESET REDUCTION/ENLARGEMENT screen is displayed.
NOTE: If the indicator lamp is already lit, press the key once to display the screen.
SELECT:
2. Press the Previous or Next key until the desired reduction/enlargement ratio is
displayed. The possible choices are any combination of the following:
•
•
•
•
NOTE: Refer to "Media Series" in the "Main Menu" section for more information about enabling
media series and defining custom presets.
3. Press the Enter key to confirm your choice and return to the READY screen. The
READY screen now displays the new reduction/enlargement percentage.
NOTE: Pressing the Exit key rejects the choice and retains the previous setting.
Wide Format Copy System User Guide
MANUAL REDUCTION/ENLARGEMENT
Manual Reduction/Enlargement Screen
PRESET REDUCTION/ENLARGEMENT
100.0%
Preset Reduction/Enlargement Screen
50%, 100% (default), and 200%
65% and 129%, if the ANSI and ARCH sizes are enabled
71% and 141%, if the ISO A, ISO B or JIS B sizes are enabled
Up to six additional preset values, if these values have been defined using the
CUSTOM R/E presets menu functions.
2 Getting to know the Wide Format Copy System
100.0%
25