Table of Contents
Advertisement
For local custom fields that can be accessed by Rapport, refer to "Custom Fields" on
page 36.
Note
When performing a mass distribution of a custom device image created with
Rapport, the source device image will require unique preparation prior to
creation and distribution. Please contact the device manufacturer for more
detailed information.
Add-on Modules
To install an add-on module, an administrator must use the built-in Rapport Agent, PXE,
and VNC server utilities of the Thin Client. Disable the Write Filter and enable the Write
Filter as needed to save the changes.
Firmware Upgrades
Intel's Preboot Execution Environment (PXE) is a protocol that defines interaction
between TCP/IP, DHCP and TFTP to enable a client to download a preboot environment
from a server.
The PXE client is installed on the Thin Client while the PXE server component is part of
the Rapport Administrative Software suite.
Note
Citrix ICA auto update does not function for the ICA client installed on the
Thin Client; updates are implemented through the standard firmware
upgrade process. The Thin Client does not support upgrading using the
Microsoft Windows update Web site.
User Instructions on the First Boot Process After Loading a Standard Image
(v2.2 or Earlier Only)
If you are running version 2.2 or earlier, you must follow these important instructions when
imaging the Winterm
downloaded from the Wyse Web site.
Note
When performing a mass distribution of a custom device image that has
been created with Rapport, certain devices will require unique preparation
prior to image creation and distribution. Please contact the device
manufacturer for more detailed information.
The Winterm
on first boot after imaging. Failure to follow these instructions may result in system
TM
9000 Series Thin Clients with the standard XPe image
TM
9000 Series Thin Clients automatically run through the configuration steps
55
Hide quick links:
Advertisement
Table of Contents
