Audio - Wyse TM 9000 Series Reference Manual

40
Adding Printers
To install the print driver on the server and the text only driver on the Thin Client, complete
the following procedures:
1. Connect the printer to the parallel port.
2. Click Start | Settings | Printers and Faxes.
3. Double-click Add a printer to open the Add Printer Wizard.
4. Click Next in the first window of the wizard.
5. Select the Local printer attached to this computer option.
6. Ensure that the Automatically detect and install my Plug and Play printer check
7. Click Next.
8. Select the Use the following port: option.
9. Select the appropriate port from the drop-down list and click Next.
10.Select the Manufacturer and Model of the printer and click Next.
11. Enter the assigned default name or other name for the printer and click Next.
12.Select the Do not share this printer option and click Next.
13.Select whether to print a test page or not and click Next.
14.Click Finish.

Audio

Audio can be redirected from applications to the audio jacks on the Thin Client. The level
can be controlled externally (for example, by using a 600-ohm potentiometer control), and
powered speakers are recommended. The volume can also be adjusted using the sound
icon in the taskbar system tray. You can single-click this icon to open the master volume
control, or double-click it to open the volume control application dialog box.
Note
Printing to a locally-connected printer from an ICA or RDP session using the
server's print drivers produces full text and graphics functionality from the
printer. To do this, you must install the print driver on the server and the text
only driver on the Thin Client according to the procedures in "Adding
Printers" .
box is not selected.
The installation will complete (a test page will print if this option was selected).