Operations; Control Panel - Samsung WW8 J3 Series User Manual

Operations

Control panel

01 Cycle Selector
02 Display
03 Temp.
04 Spin
05 Options
06 Delay End
07 Soak
08 Power
09 Start/Pause
WW3000J-03581B-02 (SEPM)_EN (LE)_150424.indd 29
02
01
Turn the dial to select a cycle.
The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.
Press to change the water temperature for the current cycle.
Press to change the spinning speed for the current cycle.
Rinse Hold (No indicator): The final rinse process is suspended so
•
that the laundry remains in the water. To unload the laundry, run
a drain or spin process.
• No Spin : The drum does not spin after the final drain process.
Press to select an option from Intensive, Prewash, and Rinse+.
Press again to deselect.
Delay End lets you set the end time of the current cycle. Based
on your settings, the start time of the cycle will be determined
by the machine's internal logic. For example, this setting is useful
for programming your machine to finish a wash at the time you
normally return home from work.
• Press to choose a preset unit of hours.
Select this function to effectively remove stains from the laundry by
adding the soaking time to the current cycle.
• This function is only available with 5 cycles: Cotton, Synthetics,
Denim, Baby Care and Sports Wear.
Press to turn on/off the washing machine.
Press to start or stop operation.
03 04 05 06
08
09
07
English 29
2015-04-24 7:41:34