Maintenance; Supplied Tool Kit; Keep Gun Clean; As Needed - Graco A Series Instructions - Parts Manual

Maintenance

Supplied Tool Kit

• Hex Nut Driver; 5/16
• Screwdriver; 1/8 blade
• CeramTip Drill Bit; various sizes depending on
CeramTip size. See T
• Polycarballoy Mix Module Drill Bit; various sizes
depending on port size. See T
• 117661 Pin Vise; dual reversible chucks
Reversible
• 15B817 Flush Manifold

Keep Gun Clean

Keep gun clean with accessory gun cover, page 49.
Applying a light coat of lubricant will make cleaning eas-
ier.

As Needed

1.
Clean Outside of Gun, page 21.
2.
Clean CeramTip, page 24, a minimum of once a
day.
3.
Clean Air Cap, page 21.
20
2, page 24.
ABLE
1, page 23.
ABLE
Reversible
TI3864a
4.
Clean Muffler, page 21.
5.
Clean Fluid Manifold, page 21.
6.
Clean Polycarballoy Mix Module, page 22.

Daily

Follow Shutdown, page 16.

Weekly to Monthly

1.
Clean Purge Rod, page 25.
2.
Clean Check Valves, page 38. Check o-rings and
screens.
3.
Check that safety lock threaded connection is tight,
page 41.
Maintenance
309856A