Graco A Series Instructions - Parts Manual page 13

8.
Open B (RESIN) fluid valve (about three half
turns). Then open A (ISO) fluid valve.
B
A
9.
Disengage safety lock, page 11.
309856A
10.
Test spray onto cardboard. Adjust pressure and
temperature to get desired results.
11.
Apply layer of lubricant over front of gun and lock
TI3838a
ring, or use gun cover to prevent overspray
buildup and ease disassembly. See page 49 to
order lubricant and gun cover.
12.
Gun is ready to spray.
TI3849a
Air supply is required for gun actuation. Do not dis-
connect gun air supply until fluid pressure is relieved,
page 17.
CAUTION
Setup
TI3861a
13