Table of Contents
Advertisement
K600/K608/V600 Working Instructions - mechanical
3.8 Frame & Camera Front
REMOVAL
Follow the Removal instructions of sections 3.1 – 3.7
Remove the three screws using the Phillips bit.
Removed screws cannot be reused and must be
scrapped!
.
Insert the Front Opening Tool into the gap between the
BTB connector of the camera front and the PCB.
Disconnect the BTB connector by pushing the Front
Opening Tool upwards.
.
Release the frame by unsnapping four snap hooks,
st
where this picture shows the 1
snap hook.
nd
2
snap hook.
3/00021-1/FEA 209 544/94 A
17(33)
Company Internal
Sony Ericsson Mobile Communications AB
Advertisement
Table of Contents
