Technical Specifications - Windsor Saber Cutter 10052400 Operating Instructions Manual

Windsor walk behind scrubber operating instructions
Hide thumbs Also See for Saber Cutter 10052400:
Table of Contents

Advertisement

TECHNICAL SPECIFICATIONS

ITEM
Nominal power
Rated Voltage
Rated Amperage
Batteries
Scrub Brush Motors
Vacuum Motor
Propelling Motor
Mass (GVW)
Weight empty without batteries
Solution Control
Solution tank capacity
Recovery tank capacity
Scrub brush diameter 32 in. (81 cm) scrub head
Scrub brush pressure
Scrub brush speed
Tires
Casters
Foundation Pressure
Maximum Speed
Coverage with 32 in. (81 cm) scrub head
Frame Construction
Brakes (optional)
Minimum aisle u-turn width with 32 in. (81 cm) scrub head
Maximum rated climb and descent angle with empty tanks
and without optional parking brake
Maximum rated climb and descent angle with full tanks
and without optional parking brake
* Cleaning rate results will vary depending on floor type, building structure, etc.
3-1
CUTTER 36V 86039100 05/01/07
DIMENSION/CAPACITY
2160 W
36 Volt DC
60 amps
6 x 6 volt 250-305-335 AH @ 20 Hr rate
2 x .75 hp (.56 kW)
3 Stage .75 hp (.56 kW)
.75 hp (.56 kW)
1265 lb (574 kg) w/335 AH batteries
433 lb (196 kg)
Gravity feed, fully variable with automatic
shut-off in neutral
33 gal (125 L)
35 gal (132 L)
16 in (41 cm)
Actuated 0 lbs to 150 lbs (0 kg to 68 kg)
200 rpm
2 x 12 in (30.5 cm) Non-Mark Foam Fill
2 x 4 in (10.2 cm) polyurethane, Non-Mark
64 lbs/in² (441 kPa)
3.2 miles/hour (5.2 km/hour)
36,250 ft²/hr @ 3.0 mph with 2 in overlap *
Powder coated steel
Tire lock parking
69 inches (175 cm)
2%
2%

Advertisement

Table of Contents
loading

Table of Contents