Installation Configuration Functions - Fujitsu Super High Power Series Design & Technical Manual

3-12. Installation configuration functions

Line Access
I Pre-setting
This control enables you to choose one of the 4 pre-selected installation configurations.
The hydraulic layouts for the various configurations are detailed in the section: "Installation
Configurations".
• Pre-setting 1: 1 heating circuit with or without electrical back-up, with DHW tank
5700
• Pre-setting 2: 2 heating circuits with or without electrical back-up, with DHW tank
• Pre-setting 3: Boiler connection and 1 heating circuit and DHW tank
• Pre-setting 4: Boiler connection and 2 heating circuits and DHW tank
• Pre-setting 5 and more: Not used
5710 S Heating circuit 1
S Cooling circuit 1
5711
Set the parameter to "2-pipe system cooling" with the cooling kit.
5715 S Heating circuit 2
S Cooling circuit 2
5716
Set the parameter to "2-pipe system cooling" with the cooling kit. If the installation consists of 2
heating circuits.
5731 S DHW controlling element Q3
Output electrical immersion heater
5740 S
K6
Type electrical immersion heater
5806 I
flow
5950 S Function input H1
5953 S Input value 1 H1
5954 S Function value 1 H1
5955 S Input value 2 H1
5956 S Function value 2 H1
5960 S Function input H3
5963 S Input value 1 H3
5964 S Function value 1 H3
5965 S Input value 2 H3
5966 S Function value 2 H3
5980 S Function input EX1
5981 S Contact type input EX1
5982 S Function input EX2
5983 S Contact type input EX2
5985 S Contact type input EX3
6098 S Readjustment collector sensor
6100 S Readjustment outside sensor
6117 S Central setpoint compensation
6120 S Frost protection plant
6201 S Reset sensors
6205 S Reset to default parameters
3-12. Installation configuration functions
Function
1,2,3,... 9
Off, On
Off
4-pipe system
2-pipe system
Off, On
Off
4-pipe system cooling
2-pipe system cooling
No charging request ¦
Charging pump ¦
Diverting valve
0.1...99 kW
1: 3-stage
2: 2-stage excluding
3: 2-stage complementary
4: Modulating UX
NC (Normally-closed contact)
NO (Normally-opened contact)
NC (Normally-closed contact)
NO (Normally-opened contact)
NC (Normally-closed contact)
NO (Normally-opened contact)
-20...20°C
-3...3°C
1...100°C
On, Off
No, Yes
No, Yes
- (03-43) -
Setting range or display
Factory
setting
1
On
Off
On
Off
Diverting
valve
2
3: 2-stage
complement
ary
---
0
0
10
100
None
0
0
10
100
1
NO
Low-tariff E5
NC
NO
0°C
0°C
5°C
On
No
No
3. Function table