Fujitsu Super High Power Series Design & Technical Manual page 58

Adjustment function details:
• Operating mode
For heating circuits, there are several functions available which can be individually adjusted for
each heating circuit. The programming lines for the 2
tension module has been connected to the controller. Operation of heating circuits 1 and 2 is di-
rectly controlled via a operating mode key.
• Setpoint values
HC1
710
712
714
716
– Room temperature:
Room temperature can be set according to different setpoint values. Depending on the selected
mode, these setpoints are activated and provide different temperature levels in the rooms. The
ranges of configurable setpoints are defined by their interdependencies, as shown in the graph
below.
– Frost protection:
The protection mode automatically prevents an excessively sharp drop in room temperature. In
this case, the control adopts the frost protection room setpoint.
3-4. Heating circuit 1 and 2 functions
Line
HC2
1010 Comfort setpoint
1012 Reduced setpoint
1014 Frost protection setpoint
1016 Maximum comfort setpoint
nd
heating circuit are displayed only if the ex-
Function
Reduced setpoint
Frost prot. setpoint
- (03-14) -
Comfort setpoint
maximum
Comfort setpoint
3. Function table