Table of Contents
Advertisement
6.2
Check the brush position also at AV=0, AV=4 and AV=8 also. The limit is ±0.2 AV.
(each pattern element is 0.1AV).
Note: Some R AV boards have circular marks indicating full step intervals and
others have triangular marks.
6.3
After the adjustment is finished, stake the mounting screw with diabond.
7. Coupling Adjustment Plate Adjustment
7.1
Set the tool standard lens to "A".
7.2
Loosen the coupling lever screw.
7.3
Adjust the eccentric (C) (Fig. 1) so that there is no space between the charge gear
and coupling lever.
7.4
After adjustment stake both the eccentric (C) and coupling lever screw with
diabond.
7.5
Lubricate the friction surfaces of the charge gear and coupling lever with UTLM-10.
8. Front Panel Unit Wiring Diagram
Canon NEW F-1 Service manual
Assembly and Adjustment Notes
Page 60
Hide quick links:
Advertisement
Table of Contents
