Table of Contents
Advertisement
17. Following Needle Hidden Position
17.1 Activate the stop-down lever, with the lens on
or off of "A", the following needle must not be
visible.
17.2 Push the stop-down lever back into the normal
position. With the lens off of "A" the following
needle is visible. It must disappear when the
lens is set to "A".
17.3 Adjust the hex-head eccentric (dwg.) to meet
these requirements.
17.4 Following Needle Movement (Reference)
18. Release Stroke and Pressure (Checks)
18.1 Mechanical Release (without battery)
Shutter button protrusion
Release Stroke
Total Stroke
Release pressure
18.2 Electromagnetic Release
SW 1 ON
SW 2 ON
SW 1 - SW 2 Separation
Total Stroke
SW 1 Pressure
SW 2 Pressure
Canon NEW F-1 Service manual
Adjustment Notes
:
1.0±0.2mm (Std: Shutter Ring)
:
1.4±0.2mm
:
1.7±0.1mm
:
Under 1,000 g
:
0.8+0.2mm
:
1.4±0.2mm
:
At least 0.5mm
:
1.7±0.lmm
:
100±20 q
:
350±50 g
Page 29
(except when R button
set or at "B")
Hide quick links:
Advertisement
Table of Contents
