Hitron CDA3-35 User Manual page 19

Here's the way to reset the CDA3-35:
Press the RESET button on the CDA3-35, and hold it in for ten seconds or
longer.
The CDA3-35 turns off and on again, using its factory default settings.
NOTE: Depending on your CDA3-35's previous configuration, you may need to re-
configure your computer's IP settings; see
as soon as there is activity on the port IP Address Setup.
19 19 Version 1.0, 05/2015. Copyright
Version 1.0, 05/2015. Copyright
CDA3-35 User's Guide
The Status and LAN LEDs light up
on page 15.
2012 Hitron Technologies
2015 Hitron Technologies
INTRODUCTION