Schedule And Standby - Husqvarna AUTOMOWER 305 Operator's Manual

4.8 Schedule and Standby

The product has an inbuilt standby period
according to the Standby time table. The standby
period provides for instance a good opportunity to
water or play games on the lawn.
The standby time is depending on how much
active time (cutting and searching) the product
has each day. The active time is in turn
depending on for example battery capacity,
slopes and grass growth. When the product has
operated the allowed active period in a day, the
Today's mowing complete is shown in
message
the display. The product is then in standby mode
until next day.
If the schedule setting is divided into 2 work
periods, the standby period can be divided into a
number of periods. The minimum standby period
time must however be according to the Standby
time table.
Product work capacity
®
Automower 305
4.8.1 Example 1
This example is applicable to products with a
specified work area of 500 m
the same for the other models.
Schedule setting, Period 1: 06:00-24:00
Active period (A): 06:00-16:00
The schedule settings ensure that the product
begins cutting the lawn at 06:00. At 16:00 the
product has reached the maximum available
operating hours and is therefore parked in
standby mode. The product starts cutting the
grass again next day at 06:00.
1462 - 001 - 24.02.2020
Standby time, mini-
mum hours per day
14
2
, but the principle is
Example: A specified work area of 500 m
Operation, A = max. hours
Charging/Standby, B = min. hours
4.8.2 Example 2
This example is applicable to products with a
specified work area of 500 m
the same for the other models.
The timer settings can be divided into 2 work
periods to prevent mowing when there usually is
other activities ongoing. If the timer setting is
divided into 2 work periods, the minimum standby
period must in total be according to the Standby
Schedule and Standby on
time table. Refer to
page 37 .
Timer setting Period 1 (A): 06:00-12:00
Timer setting Period 2 (C): 18:00-24:00
Active period (A): 06:00-12:00
Active period (C): 18:00-22:00
The product operates between 00:00 and 12:00.
It starts again at 18:00 but stops at 22:00 due to
standby mode until it starts again at 00:00.
2
10
14
2
, but the principle is
Operation - 37