Symbols On The Product; Symbols On The Display - Husqvarna AUTOMOWER 305 Operator's Manual

26. Measurement gauge when installing the
boundary wire (the measurement gauge is
broken loose from the box)
27. Operator's Manual and Quick Guide
28. Extra blades
29. Low voltage cable
30. Alarm decal

1.3 Symbols on the product

These symbols can be found on the product.
Study them carefully.
WARNING: Read the
user instructions before
operating the product.
WARNING: Disable the
product before working on
or lifting the product.
WARNING: Keep a safe
distance from the product
when operating. Keep
your hands and feet away
from the rotating blades.
WARNING: Do not ride
on the product. Never put
your hands or feet close
to or under the product.
Lock function.
Use a detachable power
supply as defined on the
rating label next to the
symbol.
This product conforms to the
applicable EC Directives.
Noise emission to surroundings. The
product's emissions are set out in
Technical data on page 55 and on the
rating plate.
1462 - 001 - 24.02.2020
It is not permitted to dispose this
product as normal household waste.
Ensure that the product is recycled in
accordance with local legal
requirements.
The chassis contains components
which are sensitive to electrostatic
discharge (ESD). The chassis must
also be resealed in a professional
manner. For these reasons the chassis
shall only be opened by authorized
service technicians. A broken seal can
result in the entire or parts of the
guarantee no longer being valid.
The low voltage cable must not be
shortened, extended or spliced.
Do not use a trimmer nearby the low
voltage cable. Be careful when
trimming edges where the cables are
placed.

1.4 Symbols on the display

The schedule function controls when
the product cuts the lawn.
The security function lets the operator
select between 3 security levels.
The messages function shows error
messages and possible cause for the
problems.
The weather timer function
automatically adapts the cutting
intervals to the grass growth.
The installation function for manual
settings for the installation.
The settings function is where the
general settings for the products are
set.
Introduction - 5