• Unplug from power outlets and never touch the inside of the product if its
casing has been broken open. Danger of electric shock exists.
• Never touch the plug with wet
hands. Danger of electric shock exists.
• Do not connect non‐specified devices.
Operating safeguards
• Unplug the product from power outlets before cleaning. Do not use liquid or
aerosol cleaners.
• Do not disassemble the product.
• Never put metal objects inside the product. If metal objects enter the product,
turn off the circuit breaker and contact an authorized service center.
Medical
• Consult the manufacturer of any personal medical devices, such as pacemakers
or hearing aids, to determine if they are adequately shielded from external RF
(radio frequency) energy. Wireless LAN features operate between the frequencies
listed below, with a peak transmission power of 100mw:
2.412 GHz – 2.462 GHz
5.180 GHz – 5.320 GHz
5.500 GHz – 5.700 GHz
5.745 GHz – 5.825 GHz
• Do not use the product in Healthcare facilities if any regulations posted in the
area instruct you not to do so. Hospitals or Healthcare facilities may be using
equipment that could be sensitive to external RF energy.
CAUTION
Installation and location
• Never install wiring during a lightning storm.
• The AC adaptor is used as the main disconnect device. Ensure that the AC outlet
is installed near the product and is easily accessible.
• Mount the product on the stable location where the camera can be adequately
supported when installing.
• Do not mount the product on soft material. It may fall down, break or cause
injury.
• Do not mount the product on the following materials: gypsum board, ALC
(autoclaved lightweight cellular concrete), concrete block, plywood less than 25
mm (1 inch) thick, etc.