Installation And Instructions - Mitsubishi Electric FR-A800 Plus Series Installation Manuallines

1 INSTALLATION AND INSTRUCTIONS

1.1 Inverter Type
Symbol Voltage class Symbol Structure, functionality
2 200 V class 0
4 400 V class 2
FR - A8 0
Capacity plate
Inverter model
Serial number
*1
Models can be alternatively indicated with the inverter rated current (SLD rating).
*2
Specification differs by the type. Major differences are shown in the table below:
Type Monitor output
FM Terminal FM:
(terminal FM equipped Terminal AM:
model)
CA Terminal CA:
(terminal CA equipped
model) Terminal AM:
*3
Conforming to IEC60721-3-3 3C2/3S2.
*4
For the FR-A820-00340(5.5K)-R2R or higher, and the FR-A840-00170(5.5K)-R2R or higher
*5
Inverter equipped with a built-in Ethernet board (FR-A8ETH).
Notes
O The rating plate shows the inverter rated current in SLD operation (Super Light Duty). The overload current rating at SLD is
110% of the rated current for 60 s and 120% for 3 s at surrounding air temperature of max. 40 °C.
O In this Instruction Manual, the inverter model name consists of the applicable motor capacity and the rated current.
(Example: FR-A842-07700(315K)-R2R)
For further specification details like capacity, current or overload current rating refer to chapter 7.
O In this installation guideline the following common designations are used for the different types of inverter models:
– FR-A8m0: Standard model
– FR-A8m2: Separated converter type
O For selecting the right frequency inverter you should know details of your application and especially the load characteristic.
O For how to read the SERIAL number, refer to page 59.
*1
Capacity
00023 to
Standard model
12120
0.4 to 500K Inverter ND rated
Separated converter type
2 - 00046
pulse train output
analog voltage output
(0 to 10 V DC)
analog current output
(0 to 20 mA DC)
analog voltage output
(0 to 10 V DC)
Description Symbol Type
Inverter SLD rated
-1
current [A]
-2
capacity [kW]
-E1
-E2
-1 - R2R
Rating plate
Inverter model
Input rating
Output rating
Serial number
Country of origin
Built-in EMC Control
filter logic
OFF Sink logic
ON Source logic
Communica- Symbol Circuit board
*2
tion type coating
FM Without Without
RS-485
CA -60
*4
FM
-06
*5
Ethernet
CA
Symbol
R2R Roll to roll dedicated model
Initial setting
Pr. 19
Rated
"Base frequency
frequency
voltage"
60 Hz 9999
(same as the power
supply voltage)
50 Hz 8888
(95% of the power supply
voltage)
Plated
*3
conductor
Without
With Without
With With
Function
1