Mitsubishi Electric FR-A800 Plus Series Installation Manuallines page 34

BASIC OPERATION
5.1.2 Basic operation
Operation mode switchover/frequency setting
External operation mode
*1
(At power-ON)
First screen
(Output frequency monitor) *2
Parameter setting mode
*5
Function mode
Hold down
*1
For the details of operation modes, refer to the
*2
Monitored items can be changed. (Refer to the
*3
For the details of the trace function, refer to the
*4
For the details of faults history, refer to the
*5
The USB memory mode will appear if a USB memory device is connected. Refer to the
memory mode.
28
PU operation mode
Value change
(Output current monitor)
Value change
Parameter clear All parameter clear
Group parameter setting
(Example)
Blinking
Fault record 1
The last eight fault records can be displayed.
(On the display of the last fault record (fault record 1),
a decimal point LED is ON.)
When the fault history is empty,
"
FR-A800 Instruction Manual (Detailed)
"
FR-A800 Instruction Manual (Detailed)
"
FR-A800 Instruction Manual (Detailed)
"
FR-A800 Instruction Manual (Detailed)
*1
Second screen
*2
Faults history clear
Automatic parameter setting
*3
Trace function
(Example)
Blinking
*4
Fault record 2
is displayed.
"
.
"
.)
"
.
"
.
"
FR-A800 Instruction Manual (Detailed)
*1
PU JOG operation mode
Alternate display
Example
Frequency setting has been written and
completed.
Third screen
*2
(Output voltage monitor)
The present setting is
displayed
Example Alternate display
Parameter write is completed.
Parameter copy
Initial value change list
(Example)
Blinking
*4 *4
Fault record 8
"
for the USB