System Settings - Roland JU-06A Operation Manual

SYSTEM SETTINGS

1. Hold down the ARPEGGIO [ON/OFF] button and select a parameter by pressing one of the numeric
buttons shown in the following table.
2. Use the [VALUE] knob to select the value.
3. Press the ARPEGGIO [ON/OFF] button once again to confirm the value and exit system settings.
BUTTON PARAMETER
[1] Master Tune
[2] MIDI Channel 1-16
[3] MIDI Clock
Source
[4] Transpose
*2
[5] Key Velocity
*1
VALUE
433-448hz
At (Auto)
INT
(Internal)
MID
(MIDI)
USB
-6 - 5
Specifies how the sound engine responds to velocity
data (the force with which you play a note).
* This setting also applies to the MIDI output when
you play the K-25m.
TCH
(Touch) data.
64
127
EXPLANATION
Specifies the master tuning.
Default 440 Hz
Specifies the MIDI transmit/
receive channel (1-16)
If MIDI clock is being input to the MIDI
IN connector or the USB port, the
JU-06A's tempo will automatically
synchronize to MIDI clock (default).
The JU-06A operates at the tempo
specified on the unit itself. Choose the
"INTERNAL" setting if you don't want to
synchronize to an external device.
Always synchronize to the MIDI clock
received from the MIDI IN connector.
Always synchronize to the MIDI clock
received from the USB port.
Transposes the keyboard range in
semitones.
Default: 0
The sound engine responds to velocity
Regardless of the velocity, the sound
engine always operates with a fixed
value (64 or 127).
Default: 127