Download Print this page
Roland Boutique JU-06 Faq
Hide thumbs Also See for Boutique JU-06:

Advertisement

Quick Links

Roland Boutique JU-06 FAQ
Q&A
I cannot transmit the data using a micro USB cable.
Even when the JU-06's VCA Level is at 0, I still hear sound.
I hear a small amount of noise when I turn on the Chorus effect of the JU-06 or JX-03.
I specified "shuffle" on the step sequencer of a Boutique series unit, but the next time I turn on the power, the shuffle
setting returns to "off. "
Is a pattern that I create on the step sequencer of a Boutique series unit saved automatically?
I have trouble performing the start/stop operation on the step sequencer of a Boutique series unit.
Can I operate octave shift while in step sequencer mode on a Boutique series unit?
Can I use an external MIDI keyboard to step-record on a Boutique series unit?
Can I connect multiple Boutique series units to my PC or Mac and use them simultaneously.
Are there any points of caution to observe when connecting the OUTPUT and INPUT jacks of multiple Boutique series
units?
Can I change the parameters that are controlled by the ribbon controller of the Boutique series unit?
Can knob operations on a Boutique series unit transmit MIDI control change (CC) messages?
Can the delay time and LFO of a Boutique series unit be synchronized to the tempo?
After I input MIDI to a Boutique series unit, I can no longer produce sound with the ribbon controller.
Does the sound engine of the Boutique series support velocity?
Is the bend range of the Boutique series units memorized for each patch?
Sometimes a knob or fader operation on a Boutique series unit is not reflected in the sound.
The ribbon controller's LED on the Boutique series unit is blinking.
What is the range of the step sequencer tempo setting on Boutique series units?
How do I take the Boutique series unit out of the K-25M?
Can I make the parameter value be held even after I take my finger off the C2 ribbon controller of the Boutique series
unit?
Can I change the sampling rate of the USB audio on a Boutique series unit?
What is the range of the delay time setting on Boutique series units?
When connecting two Boutique series units with an audio cable in chain mode, how should I set the volume of the
units?
Do the Boutique series units have an analog sound engine?
Do the Boutique series units produce the same sound as the JUPITER-8/JUNO-106/JX-3P?
Do the Boutique series units have stereo output?
What parameters can be saved in a pattern of the Boutique series unit's step sequencer?
Does the step sequencer of the Boutique series units support velocity?
Can I input a tie in the step sequencer of the Boutique series units?
Can knob and slider movements be recorded in the step sequencer of the Boutique series units?
Is the step sequencer of the Boutique series units polyphonic?
Is the chain mode of the Boutique series units valid even if a different model of unit is connected via a MIDI cable?
Can I connect Boutique series models via MIDI and make them play in synchronization?
Can I layer the sound of multiple Boutique series units?
Can the Boutique units be powered via USB?
What is the maximum number of Boutique series units that can be connected in chain mode?
1
Copyright © 2015 ROLAND CORPORATION
2
2
2
2
2
2
2
2
3
3
3
3
3
3
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
02

Advertisement

loading

Summary of Contents for Roland Boutique JU-06

  • Page 1 Roland Boutique JU-06 FAQ Q&A I cannot transmit the data using a micro USB cable. Even when the JU-06’s VCA Level is at 0, I still hear sound. I hear a small amount of noise when I turn on the Chorus effect of the JU-06 or JX-03.
  • Page 2 Roland Boutique JU-06 FAQ I cannot transmit the data using a micro USB cable. Do not use a micro USB cable that is designed only for charging a device. Charge-only cables cannot transmit data. Even when the JU-06’s VCA Level is at 0, I still hear sound.
  • Page 3 Roland Boutique JU-06 FAQ Set the MIDI transmit channel of your external MIDI keyboard to match the MIDI channel of your Boutique series unit. Can I connect multiple Boutique series units to my PC or Mac and use them simultaneously.
  • Page 4 Roland Boutique JU-06 FAQ When you turn the power off and on again, the preview function is enabled. Does the sound engine of the Boutique series support velocity? Yes, it supports velocity. With the factory settings, the velocity is set to a fixed value; in the system settings, change the key velocity setting to [1] (TOUCH).
  • Page 5 Roland Boutique JU-06 FAQ The USB audio sampling rate is fixed at 44.1 kHz. What is the range of the delay time setting on Boutique series units? The delay time range is 20 msec to 700 msec. When connecting two Boutique series units with an audio cable in chain mode,...
  • Page 6 Can the Boutique units be powered via USB? They support being supplied with power from a computer’s USB ports. Roland does not guarantee operation with a USB power adaptor. What is the maximum number of Boutique series units that can be connected in...
  • Page 7 Roland Boutique JU-06 FAQ Up to three units is not a problem. Operation with more than three units depends on the conditions of use.