System Settings; Settings Overview - Roland JX-03 User Manual

V. System Settings

Settings Overview

Numeric Buttons [1] - [16]
in settings mode, the 16 buttons of the common section are called the [1] - [16] buttons.
SOLO/UNISON/POLY/OCTAVE SHIFT/PORTAMENTO
While holding down the CHORUS button, specify the value by using the numeric buttons or the C1/C2 ribbon
controller to make adjustments.
SOLO
UNISON
POLY
Octave Shift
Portamento
Portamento Time

SYSTEM SETTINGS

While holding down the MANUAL button, press one of the numeric buttons to select the parameter
MASTER TUNE
MIDI CHANNEL
MIDI CLOCK
TRANSPOSE
KEY VELOCITY
VELOCITY CURVE
AUTO OFF
LED DEMO
CHAIN MODE
NOTE SCALE
[14] Plays Monophonically
[15] Plays all sounds in unison
[16] Plays polyphonically
[4] - [13] Shifts the keyboard range in steps of one octave. Default Setting is [8]
C1- ON/OFF Creates a smooth change in pitch between one key and the next key
played
C2 - 0 - 100 Adjusts the time required for the pitch change.
[1] 1-16 Sets the master tune of the module - 440 Hz is [8]
[2] 1-16 Sets the MIDI channel for the module - 1-16
[3] 1-2 [1] AUTO [2] INTERNAL
[4] 2-13 Transposes the keyboard range in semitones. 0 = [8]
[5] 1-3 [1] TOUCH [2] 64 [3] 127
[6] 1-3 [1] Light [2] Medium [3] Heavy
[7] 1-2 [1] OFF [2] ON - Power will switch off after 30 minutes
* Auto off does not occur when USB is connected.
[8] 1-4 [1] OFF [2] 1 Minute [3] 3 Minutes [4] 10 Minutes
[9] 1-2 [1] OFF [2] ON
[10] 1-16 See Pg 21 for scale information
28