Epson LS500W User Manual page 86

3. Select the Image Enhancement setting and press Enter.
4. Select the Image Preset Mode setting and press Enter.
5. Select one of the presets and press Enter.
Note: If you select a previously used preset, your new adjustments overwrite the old ones.
6. Press Esc to return to the Image Enhancement menu.
7. Fine-tune the following settings:
• Frame Interpolation
• Deinterlacing (depends on the signal)
• Noise Reduction
• MPEG Noise Reduction
• Super-resolution
• Detail Enhancement
Note: You can select Image Preset Mode and toggle between Off and the preset you were
adjusting to quickly check the effects of the settings. The effect of a preset can vary depending on
the input signal type.
8. Press Menu or Esc to exit the menus.
The currently selected Image Preset Mode will be updated with the current settings.
Parent topic: Using Advanced Image Adjustment Features
Related references
Image Quality Settings - Image Menu
86