Epson LS500W User Manual page 102

Setting
3D Setup
Aspect
Overscan
Color Space
Options
3D Display
3D Format
3D Depth
Diagonal Screen Size
3D Brightness
Inverse 3D Glasses
3D Viewing Notice
Auto
Normal
Full
Zoom
Auto
Off
4%
8%
Auto
BT.709
BT.2020
102
Description
3D Display: Select Auto or 3D to
enables 3D image projection
3D Format: Sets the 3D format for the
input signal
3D Depth: Sets the depth for the 3D
image
Diagonal Screen Size: Sets the
projection size for the 3D image to
optimize the 3D effect
3D Brightness: Sets the brightness for
the 3D image
Inverse 3D Glasses: reverses the
synchronization timing for the left/right
shutters on the 3D glasses and the
left/right images. Enable this function if
the 3D effect is not displayed correctly
3D Viewing Notice: Toggles a notice to
appear when viewing 3D content
Sets the available aspect mode for the
selected input source
Changes the projected image ratio to
make the edges visible by a selectable
percentage or automatically
Sets the conversion system for the color
space