Solutions When The Image Is Fuzzy Or Blurry; Solutions When The Image Brightness Or Colors Are Incorrect - Epson LS500W User Manual

Image Quality Settings - Image Menu

Solutions When the Image is Fuzzy or Blurry

If the projected image is fuzzy or blurry, try the following solutions:
• Adjust the image focus.
• Clean the projector lens.
• Position the projector close enough to the screen, and directly in front of it.
• Position the projector so the keystone adjustment angle is not so wide that it distorts the image.
• Adjust the Sharpness setting to improve image quality.
• If you are projecting from a computer, adjust the computer's resolution to match the projector's native
resolution, if possible.
• Make sure you removed the lens cap.
Parent topic:
Related concepts
Projector Placement
Related references
Image Quality Settings - Image Menu
Related tasks
Cleaning the Lens
Focusing the Image

Solutions When the Image Brightness or Colors are Incorrect

If the projected image is too dark or light, or the colors are incorrect, try the following solutions:
• Check the Color Space and Dynamic Range settings in the Signal menu and make sure they match
the input signal. Select Auto for each setting.
• Try selecting a color mode that best fits the image and environment.
• Check your video source settings.
• Adjust the available settings on the Image menu for the current input source, such as Brightness,
Contrast, Tint, White Balance, and/or Color Saturation.
• Make sure you selected the correct Video Range or EDID setting on the Signal menu, if available for
your image source.
Solving Image or Sound Problems
137