Image Aspect Ratio; Changing The Image Aspect Ratio - Epson LS500W User Manual

Image Aspect Ratio

The projector can display images in different width-to-height ratios called aspect ratios. Normally the
input signal from your video source determines the image's aspect ratio. However, for certain images
you can change the aspect ratio to fit your screen.

Changing the Image Aspect Ratio

Available Image Aspect Ratios
Parent topic:
Changing the Image Aspect Ratio
You can only change the aspect ratio to resize the displayed image. The input signal must be low
resolution.
Note: Aspect setting adjustment is only available when projecting from an HDMI source. You may not
be able to change the Aspect setting depending on the input signal from the HDMI source. When a 4K
image signal is being input, you can only select the Normal setting.
1. Turn on the projector and switch to the image source you want to use.
2. Press the Menu button on the projector's control panel or remote control.
3. Select the Signal menu and press Enter.
4. Select Aspect and press Enter.
Using Basic Projector Features
73