Epson PowerLite 8350 User Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Projector
  5. PowerLite Home Cinema 8350
  6. User manual

Epson PowerLite 8350 User Manual

Home theater projector
Hide thumbs Also See for PowerLite 8350:
Table of Contents

Advertisement

Quick Links

®
PowerLite
Home Cinema 8350/8700 UB
Home Theater Projector
User' s Guide

Advertisement

Table of Contents
loading

Related Manuals for Epson PowerLite 8350

Summary of Contents for Epson PowerLite 8350

  • Page 1 ® PowerLite Home Cinema 8350/8700 UB Home Theater Projector User’ s Guide...

  • Page 2: Copyright Notice

    Epson product. Epson is not responsible for any use of this information as applied to other products. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to...

  • Page 3: Table Of Contents

    Installing the Projector Connecting the Cables Connecting Video and Computer Equipment Making Other Connections Installing Batteries in the Remote Control Turning the Projector On and Off Turning On the Projector Turning Off the Projector Selecting the Image Source Positioning the Image...
  • Page 4 Adjusting the Picture Quality Input Brightness Settings Sharpness and Picture Quality Settings Color Settings Adjustments for Computer Images Selecting Memory Settings and Resetting the Projector Selecting Memory Settings Creating Memory Settings Renaming Memory Settings Deleting Saved Memory Settings Resetting the Projector...
  • Page 5 Where to Get Help Specifications General Lamp Remote Control Dimensions Electrical Environmental Safety Compatible Video Formats ESC/VP21 Command Codes Notices Important Safety Information FCC Compliance Statement Declaration of Conformity Epson America, Inc. Limited Warranty Index Contents...

  • Page 6: Introduction

    Introduction The PowerLite ® Home Cinema 8350/8700 UB projector lets you enjoy theater-quality images in the relaxing environment of your own home. Designed especially for home cinema use, it offers these outstanding features: ■ Native 1080p (1920 × 1080) resolution, dynamic contrast ratio up to 200000:1 (50000:1...

  • Page 7: Projector Parts

    Projector Parts Front Lamp cover Ventilation slots Horizontal lens shift dial Back Component video port HDMI ports Air intake (filter) Control panel (top) Focus ring Lens cover Infrared receiver S-Video port Video port Cable holder Vertical lens shift dial Control panel...

  • Page 8: Projector Control Panel

    Bottom Mounting bracket attachment points Optional cable cover attachment points (brass colored) Projector Control Panel Top control panel Power button Source button Switches the video input source Warning lights Introduction Side control panel Menu button Enter button Displays the Selects menu items or...

  • Page 9: Remote Control

    Remote Control Power button Turns projector on or off Default button Restores default settings when menu is displayed Menu navigation buttons Memory button Recalls custom picture settings RGBCMY button Adjusts the hue, saturation, and brightness for each color Gamma button...

  • Page 10: Optional Accessories

    Your projector comes with a basic two-year carry-in warranty. For details, see page 74. In addition, Epson offers free Extra Care equipment failure, you won’t have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit anywhere in the United States or Canada. See your Extra Care Home Service brochure for details.

  • Page 11: Using This Manual

    Note: Contains important information about your projector. Tip: Contains helpful projection tips. Need additional help? Take advantage of Epson’s automated support services 24 hours a day at epson.com/support (U.S.) or epson.ca/support (Canada). Use this site to view FAQs (Frequently Asked Questions) or product information and e-mail your questions to Epson support.

  • Page 12: Setting Up The Projector

    Follow the instructions in this section to choose a location for the projector, connect the cables, and display an image. Choosing a Location You can install the projector for the viewing setups shown below, as well as rear projection. Center Side...
  • Page 13 (for details, see page 25). If you place the projector off to the side, aim it straight ahead (rather than at the center of the screen), then use the horizontal lens shift dial to center the image on the screen.
  • Page 14 The size of the image is determined by the distance from the projector’s lens to the screen. Depending on your display settings and how you use the Zoom ring, the actual size may differ. Use these tables as a guide for projector placement:...
  • Page 15 To determine the exact image size when you know the projection distance (or the exact projection distance when you know the desired image size), you can use the Image Size Calculator. This program is available on the Epson website at epson.com/support (U.S.) or epson.ca/support (Canada).

  • Page 16: Installing The Projector

    If you install the projector on the ceiling, you will need to invert the picture so that it appears right side up. Follow these steps: 1.
  • Page 17 The following illustrations show the dimensions of the projector: 5.4 in. 36 mm 0.5 in. 2.3 mm M4×9mm 0.2 in. 4.5 mm 131 mm 17.7 in. 450 mm 11.8 in. 300 mm 5.9 in. 150 mm 2.2 in. 56 mm 1.8 in.

  • Page 18: Connecting The Cables

    Connecting the Cables Connecting Video and Computer Equipment You can connect the projector to many types of video equipment, such as a Blu-ray ™ Disc /DVD player, digital tuner, cable or satellite box, video game console, camcorder, or digital camera. You can also connect it to a desktop or laptop PC or Apple system.
  • Page 19 (for component video), Component When you connect a large or heavy cable to the projector, such as an HDMI cable, it is recommended that you fasten it to one of the two cable holders using a commercially available cable tie.

  • Page 20: Making Other Connections

    Use the Trigger Out page 48). ■ To use an AV controller with the projector, connect a 9-pin null modem serial cable to port. Refer to the table of ESC/VP21 command codes on page 69. RS-232C Setting Up the Projector...

  • Page 21: Installing Batteries In The Remote Control

    Turning the Projector On and Off Turning On the Projector 1. Remove the lens cap. 2. Turn on any connected equipment you plan to use. 3. Turn on the main power switch on the back of the projector. Setting Up the Projector...

  • Page 22: Turning Off The Projector

    32 for details. If you’ll be using the projector at an altitude above 4921 feet (1500 meters), turn on High Altitude Mode so the fan can properly cool the projector at the high altitude air pressure. See page 49 for details.

  • Page 23: Selecting The Image Source

    Selecting the Image Source The source buttons on the projector and remote control let you switch between images from different pieces of equipment connected to the projector (such as a Blu-ray Disc/DVD player, cable or satellite box, or video game console).

  • Page 24: Positioning The Image

    If the image is not centered on the screen, use the horizontal and vertical lens shift dials to adjust its position. Caution: Do not try to move the lens by hand, or you may damage the projector. Always use the lens shift dials to change the lens position.
  • Page 25 (W) and height (H), as shown below: Maximum lens shift boundary 1/2H 1/2W Move downwards Move to Move to the right the left Move upwards Setting Up the Projector...

  • Page 26: Making Basic Adjustments

    Making Basic Adjustments Follow the instructions in this chapter to make basic adjustments to the image shape, size, color, and quality. For further refinements, see “Making Detailed Adjustments” on page 33. Focusing and Zooming Use the focus ring to sharpen the image. Use the zoom ring to reduce or enlarge the image.

  • Page 27: Choosing The Aspect Ratio

    If you display a 4:3 image using the Zoom setting, the top and bottom will be cut off. You can use the Zoom Caption Pos. option and other settings to resize and reposition the image. For details, see page 47. For details on how the projector resizes the picture when you choose an Aspect setting, see page 67. button...

  • Page 28: Choosing The Color Mode

    Use in a fully darkened room. ■ x.v.Color for the most natural color reproduction when viewing movies through HDMI. The built-in Epson Cinema Filter automatically improves color reproduction in a darkened room; it is not used when you select Making Basic Adjustments for playing video games with the blinds open.)

  • Page 29: Advanced Color Adjustments

    RGBCMY Gamma Note: You can fine-tune these and other color and image quality settings using the projector’s menu system (see page 33). You can also save combinations of picture settings with the Memory feature for easy recall (see page 43). If you don’t like the settings you have selected on a particular menu screen, you can press the Default button to restore the factory settings.

  • Page 30: Adjusting The Gamma Setting

    Adjusting the Gamma Setting You can select from five gamma settings (2.0 to 2.4) or customize your own setting from your image or a displayed graph. Lower values will increase the contrast of dark areas, but tend to blur the bright areas. Higher values will darken the light areas. Gamma presets make minor adjustments to mid-tone values.

  • Page 31: Adjusting Rgbcmy

    4. Press to adjust another color, or press Note: You can also adjust the offset and gain using the RGB setting in the projector’s menu system (see page 41). , or for that color, and use the l or r button to Brightness to exit.

  • Page 32: Locking The Projector

    Menu If you turned on the Control Panel Lock, the projector buttons are now locked. If you turned on the Child Lock, turn off the projector and let it cool down. The Child Lock takes effect after the cool-down period.

  • Page 33: Making Detailed Adjustments

    You can access the menu system either from the remote control or the buttons on the projector’s control panel. You can access the full menu or a line menu that lets you change selected settings. You can also change the menu language and control how the menus display (see page 35).
  • Page 34 3. Press the u, d, l, or r button to change settings as necessary. You may have to press the button to confirm your choice. Enter 4. When you’re finished, press the button to exit the menu system. Menu To display one of the line menus, press the bottom of the image: 1.

  • Page 35: Changing How The Menus Display

    The Brightness setting controls how much light is produced by the projector, and the Contrast setting adjusts the difference between the bright and dark areas of the projected image. The other settings in this section control how the projector interprets the light and dark areas of the picture.
  • Page 36 When this setting is on, the light output is automatically adjusted according to the brightness of the image. Select either you would like the projector to respond to changes in the brightness of the image. The setting is stored separately for each image source and color mode.

  • Page 37: Sharpness And Picture Quality Settings

    28). If your video equipment has an HDMI port and you’ve connected it to the projector using an HDMI cable, set the level of the projector to match that of the video equipment. ■ Power Consumption Image > Power Consumption This setting controls the light output from the projector.

  • Page 38: Noise Reduction

    ■ Progressive Signal > Progressive Converts interlaced to progressive signals. The projector uses 3D DigiScan Circuitry Processing for video-sourced images. For film-sourced images, you can select from 2-2, 2-3, or 4-4 pulldown detection, depending on your model. Leave the setting on output.
  • Page 39 ■ Block NR (Home Cinema 8700 UB only) Signal > Advanced > Block NR Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28) or with a signal input through the PC port. This setting reduces block noise that can appear when projecting MPEG images that have been compressed at a low bit rate.

  • Page 40: Color Settings

    Color Settings If the image colors don’t look correct, you can adjust them using these settings. Use the first three settings described below to make the most visible changes. If you only need to make slight adjustments, you can fine-tune the picture with the remaining settings. Most color settings are stored separately for each image source and color mode.
  • Page 41 ■ RGB Image > Advanced > RGB Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 28). Use the RGB settings to fine-tune the color of the image. You can adjust the offset and gain for each signal color (red, green, and blue).

  • Page 42: Adjustments For Computer Images

    In addition to the settings described previously, you can adjust the Tracking and Sync settings for analog RGB computer images. Normally, these settings are adjusted automatically by the projector. If you notice that the image is blurry or contains dark vertical bands, you may need to adjust the settings yourself.

  • Page 43: Selecting Memory Settings And Resetting The Projector

    Selecting Memory Settings and Resetting the Projector Your projector comes with 10 memory locations where you can save customized settings to obtain the best picture quality for each of your video inputs. Selecting Memory Settings You can easily recall the memory settings by using the memory button on the remote control.

  • Page 44: Creating Memory Settings

    Creating Memory Settings Memory settings can be used to store most of the picture quality settings on page 37 and color settings on page 40. Before saving them to memory, adjust the settings to the desired levels. 1. Press the Memory 2.

  • Page 45: Deleting Saved Memory Settings

    Reset Image menu settings: Open the Image menu . . . You can also reset the lamp usage timer or restore all the projector settings to their original values. Follow these steps: 1. Press the button on the remote control.

  • Page 46: Customizing Projector Features

    3. Do one of the following: ■ Select Reset Lamp Hours You should reset the lamp timer only when you install a new projector lamp. See page 56 for more information. ■ Select Reset Memory ■ Select Reset All Component, Save Memory, Language, and Lamp Hours).

  • Page 47: Screen Options

    Turn this setting off if you want to prevent the startup screen from appearing while the projector is warming up. ■ Display Background Settings > Display > Display Background Changes the screen that’s used when the projector is not receiving a signal or when you press the button to temporarily stop projection. Blank Other Setup Options ■...

  • Page 48: Video Signal

    Use this setting if you find the lights distracting in a darkened room. ■ Sleep Mode Settings > Sleep Mode Turn off this setting if you don’t want the projector to enter sleep mode. (Sleep mode shuts the projector off automatically when there is no video signal.) Select 5min.

  • Page 49: High Altitude Mode

    Settings > High Altitude Mode Adjusts the speed of the fan so it can properly cool the projector at higher altitudes. Turn this setting on if you are using the projector at an altitude of 4921 feet (1500 meters) or higher.

  • Page 50: Maintenance

    Maintenance Your projector needs little maintenance. All you need to do on a regular basis is keep the lens clean. You also may need to clean the air filter to prevent overheating. WARNING: Before you clean any part of the projector, turn it off and unplug the power cord.

  • Page 51: Cleaning The Projector Case

    Cleaning and Replacing the Air Filter Your projector includes an air filter to ensure the best performance. If dust collects on the air filter, clean it as described below. Dust clogs prevent proper ventilation and cause overheating and damage to the projector.
  • Page 52 If the dirt is difficult to remove or the filter is broken, replace it. You can purchase air filter part number V13H134A21 from an authorized Epson reseller. To find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To purchase online, visit www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).

  • Page 53: Replacing The Lamp

    Use a cloth or glove to handle the new lamp. Follow these steps to replace the lamp: 1. If the projector is on, press the P power button and wait for the light to stop flashing. 2. Turn off the power switch on the back of the projector.
  • Page 54 5. Insert the screwdriver that came with the lamp (or a similar tool) into the slot on the back of the projector to release the lamp cover. Then lift up the cover to remove it. 6. Loosen the two screws securing the lamp (they don’t come all the way out).
  • Page 55 Caution: Don’t touch the glass portion of the lamp assembly. Touching the glass could result in premature lamp failure. 9. Replace the lamp cover. (The projector won’t work if the lamp cover is open or loose.) 10. Reset the lamp usage timer, as described on page 56.

  • Page 56: Resetting The Lamp Usage Timer

    Resetting the Lamp Usage Timer After replacing the lamp, plug the projector back in, turn on the power switch on the back, and press the Ppower button. Then follow these steps to reset the lamp usage timer: 1. Press the button on the projector or remote control.

  • Page 57: Storing The Projector

    Caution: Do not try to move the lens by hand, or you may damage the projector. Always use the lens shift dials to change the lens position. If the lens shift dial becomes hard to turn, you cannot adjust the position any further.

  • Page 58: Problem Solving

    Problem Solving This section explains how to interpret the projector’s status lights, solve problems with the picture and remote control, and contact technical support. What To Do When the Lights Come On or Flash The lights on top of the projector indicate the projector’s status and let you know when a problem occurs.
  • Page 59 Cause and solution The projector is not receiving power. Make sure the power switch on the back of the projector is turned on and the power cord is connected securely at both ends. High-speed cooling is in progress. If the temperature rises further, projection will stop automatically.

  • Page 60: Solving Picture Problems

    You cannot turn on the projector. ■ Make sure the power cord is connected and the power switch in back of the projector is turned on. Then wait a moment for the Ppower light to come on before pressing the Ppower button.
  • Page 61 , but it may also be labeled key while pressing it. Check your laptop’s manual or online help. On most systems, the projector, or display on both at the same time. Allow a few seconds for the projector to sync up after pressing it. ■...
  • Page 62 The picture isn’t rectangular. ■ If the image looks like screen and angled toward it. Face the projector straight ahead (instead of at the center of the screen), then use the horizontal lens shift dial to center the image (see page 24). ■...

  • Page 63: Solving Remote Control Problems

    Solving Remote Control Problems The projector doesn’t respond to remote control commands. ■ Make sure you’re within about 30 feet of the projector, and the remote control is aimed at the projector’s front or back sensor within the ranges shown below. Approx.60 ■...

  • Page 64: Where To Get Help

    Speak to a Support Representative To use the Epson PrivateLine Support service, call (800) 637-7661 and enter the PIN on the Epson PrivateLine Support card that came with your projector. This is the fastest way of speaking to a live representative, and it’s free.

  • Page 65: Specifications

    Lamp Note: Lamp life will vary depending on mode selected, environmental conditions, and usage. Brightness decreases over time. Turn off this product when not in use to prolong the life of the projector. Type UHE (Ultra High Efficiency), E-TORL Power consumption...

  • Page 66: Remote Control

    Remote Control Range Batteries Dimensions Height Width Depth Weight Electrical Rated frequency Power supply Power consumption Specifications Approximately 30 feet (9 m) AA × 2 5.4 inches (136 mm), not including adjustable feet 17.7 inches (450 mm) 14.2 inches (360 mm); not including lens protrusion 16.1 lb (7.3 kg) (Home Cinema 8350) 16.5 lb (7.5 kg) (Home Cinema 8700 UB) 50/60 Hz AC...

  • Page 67: Environmental

    Pixelworks DNX Compatible Video Formats The projector supports analog video in NTSC, PAL, and SECAM formats, and it automatically adjusts to the incoming signal. It can receive these formats as composite video, S-video, or component video— which it accepts through the Video, S-Video, and Component ports, respectively.
  • Page 68 Component video Format/ Signal SDTV 480i 576i 480p 576p HDTV 720p 1080i 1080p Analog RGB (computer display) Signal SVGA SXGA WXGA MAC13” MAC16” MAC19” MAC21” HDMI Signal SDTV 480i 576i 480p 576p HDTV 720p 1080i 1080p Specifications Refresh rate (Hz) Resolution 720 ×...

  • Page 69: Esc/Vp21 Command Codes

    ESC/VP21 Command Codes You can use an AV controller with a 9-pin null modem serial cable to control the projector. You can download the complete ESC/VP 21 Communication Manual for home theater projectors from the Epson website at epson.com/support (U.S.) or epson.ca/support (Canada). Following are some of the...
  • Page 70 Item Aspect ratio Specifications Normal Full Zoom Wide Anamorphic Wide (Home Cinema 8700 UB) ASPECT 80 Command ASPECT 00 ASPECT 40 ASPECT 50 ASPECT 70...

  • Page 71: Notices

    service;...
  • Page 72 ■ Don’t place the projector or remote control on top of heat-producing equipment. ■ If you use the projector in a country other than where you purchased it, use the correct power cord for that country. ■ Don’t stand on the projector or place heavy objects on it.

  • Page 73: Fcc Compliance Statement

    FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception.

  • Page 74: Declaration Of Conformity

    What Epson Will Do To Correct Problems: If your product requires service during the limited warranty period, please call Epson at the number on the bottom of this statement and be prepared to provide the model, serial number, and date of original purchase. Epson will, at its option, repair or replace the defective unit, without charge for parts or labor.
  • Page 75 Epson product for carry-in warranty service are your responsibility. Epson will pay for all freight charges if you choose to send your unit to Epson for repair. If a claimed defect cannot be identified or reproduced in service, you will be held responsible for costs incurred.

  • Page 76: Index

    61 Contrast button, 9 ratio, 65 setting, 36 Contrast Enhancement, 42 Control Panel Lock, 49 Control panel lock, 32 Control panel, projector, 8 Declaration of Conformity, 74 Direct Power On, 47 Display Background setting, 47 Documentation, 11 Electrical requirements, 66...
  • Page 77 10, 64 Home Service, 10 PrivateLine Support, 11, 64 technical support, 11, 64 warranty, 10, 74 to 75 EPSON Super White setting, 36 ESC/VP21 command codes, 69 FCC Compliance Statement, 73 Filter, see Air filter Flickering, 38, 62 Focus ring, 26...
  • Page 78 Overscan, 46 Pattern button, 9, 24, 40 Picture problems, 60 to 63 Pixelworks, 67 Positioning image, 24 to 25, 46 Positioning projector, 12 to 15 Power Consumption setting, 37 PrivateLine Support, 11, 64 Problems indicator lights, 58 to 59 picture, 60 to 63...
  • Page 79 Tracking, 42 Transporting projector, 57 Trigger out port, 20, 27 Trigger out setting, 48 Turning on and off projector, 21 to 22, 60 Video Signal setting, 48 Video, compatible formats, 67 to 68 VP21 codes, 69 Warranty, 10, 74 to 75...

This manual is also suitable for:

Powerlite 8700ubV11h419020Powerlite home cinema 8350ub

Table of Contents