Table of Contents
Advertisement
7.2 Setting the clock functions
Before you use the functions:
Duration, End Time, you must
set a heating function and
temperature first. The
appliance deactivates
automatically.
You can use the functions:
Duration and End Time at the
same time if you want to
automatically activate and
deactivate the appliance on a
given time later.
The functions: Duration and
End Time do not work when
you use the core temperature
sensor.
1. Set a heating function.
2. Press
display shows the necessary clock
function and the related symbol.
3. Press
time.
4. Press
When the time ends, an acoustic signal
sounds. The appliance deactivates. The
display shows a message.
5. Press any symbol to stop the signal.
7.3 Heat + Hold
Conditions for the function:
• The set temperature is more than 80
°C.
• The function: Duration is set.
8. AUTOMATIC PROGRAMMES
WARNING!
Refer to Safety chapters.
8.1 Automatic programmes
The automatic programmes give optimum
settings for each type of meat or other
recipes.
• Meat programmes with the function:
Weight Automatic (menu: Assisted
Cooking) — This function automatically
calculates the roasting time. To use it
you need to input food weight.
again and again until the
or
to set the necessary
to confirm.
The function: Heat + Hold keeps prepared
food warm at 80 °C for 30 minutes. It
activates after the baking or roasting
procedure ends.
You can activate or deactivate the function
in the menu: Basic Settings.
1. Activate the appliance.
2. Select the heating function.
3. Set the temperature above 80 °C.
4. Press
again and again until the
display shows: Heat + Hold.
5. Press
to confirm.
When the function ends, an acoustic
signal sounds.
The function stays on if you change the
heating functions.
7.4 Extra Time
The function: Extra Time makes the
heating function continue after the end of
Duration.
Applicable to all heating
functions with Duration or
Weight Automatic.
Not applicable to heating
functions with the core
temperature sensor.
1. When the cooking time ends, an
acoustic signal sounds. Press any
symbol.
The display shows the message.
2. Press
to activate or
3. Set the length of the function.
4. Press
.
• Meat programmes with the function:
CT Sensor Automatic (menu: Assisted
Cooking) — This function automatically
calculates the roasting time. To use it
you need to input core temperature.
When the programme ends an
acoustic signal sounds.
• Recipe Automatic (menu: Assisted
Cooking) — This function uses
predefined values for a dish. Prepare
the dish according to recipe from this
book.
ENGLISH
15
to cancel.
Advertisement
Table of Contents
