Table of Contents
Advertisement
14
www.electrolux.com
CAUTION!
The appliance is hot.
There is a risk of burns.
Be careful when you
empty the water tank.
When the appliance cools down, soak up
all remaining water from the steam
generator with the sponge. If necessary,
clean the steam generator with some
vinegar. Let the appliance dry fully with the
door open.
6.8 Heat-up indicator
When you activate a heating function, the
bar on the display comes on. The bar
shows that the temperature increases.
When temperature is reached the buzzer
7. CLOCK FUNCTIONS
7.1 Clock functions table
Clock function
If you set the time for a clock function, the
time starts to count down after 5 seconds.
If you use the clock functions:
Duration, End Time, the
appliance deactivates the
heating elements after 90 %
of the set time. The appliance
uses the residual heat to
continue the cooking process
until the time ends (3 - 20
minutes).
Minute Minder
Duration
End Time
sounds 3 times and the bar flashes and
then disappears.
6.9 Fast Heat Up Indicator
This function decreases the heat-up time.
Do not put food in the oven
when the Fast heat up
function operates.
To activate the function, hold
seconds. The heat-up indicator alternates.
6.10 Residual heat
When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
Application
To set a countdown (max. 2 h 30 min). This
function has no effect on the operation of
the appliance. You can also activate it when
the appliance is deactivated.
Use
to activate the function. Press
or
to set the minutes and
To set the length of an operation (max. 23 h
59 min).
To set the switch-off time for a heating
function (max. 23 h 59 min).
for 3
to start.
Advertisement
Table of Contents
