Instrument Operation - HP 4934A Operating And Calibration Manual

Instrument Operation
During this measurement the transmitter is quiet terminated (indicated by a
decimal point in the left window when the display is in the TRMT mode).
RECEIVER
1 Use the MEAS key to select N.T. GND - there will be a 10 second delay before
the HP 4934A starts measuring.
2 Select the required filter using the FILTER key.
3 Display the received noise level using the DISPLAY key (the RCV indicator will
be lit). The noise level, in dBm, is in the left window. If you select the C-Message
filler, the result is in dBmC.
2-24 Making Measurements