Stopping/Restarting Your Washer - Whirlpool 7LSC9245BN0R Use And Care Manual

9. (OPTIONAL STEP) if desired, select
Extra Rinse "On" to add an additional
rinse to the end of the wash cycle.
l
Depending on your washer model, you
may have either
a pushbutton
or
CLEAN TOUCHTY
Extra Rinse
Selector.
l
Use the Extra Rinse option when using
extra detergent for the Super Wash
cycle or any of the following cycles:
Heavy, Permanent Press, or Delicate.
The Extra Rinse option is not offered in
the Regular cycle.
l
Before a cycle starts, select Extra Rinse
"On". The washer automatically adds an
extra rinse and spin to the cycle.
l
if you do not want an extra rinse and
spin, or if you are using the Regular
cycle, select Extra Rinse "Off".
NOTE:
On CLEAN TOUCH models, the
"On" indicator lights when Extra Rinse
is selected.
9. Push in and turn the Cycle Control
Knob clockwise. Stop when the indica-
tor on the outer ring points to the
number in the wash cycle you want.
l
The numbers are minutes of wash time.
l
The cycles are described on page 10.
Stopping/restarting your washer
if necessary, you can stop your washer
during a cycle to add more clothes.
l
To
stop
the washer at any time, push in
the Cycle Control Knob.
l
To restart the washer, close the lid (if
necessary) and pull out the Cycle
Control Knob.
9