IMPORTANT SAFETY INSTRUCTIONS WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions, including the following: Read all instructions before using the washer. The appliance is not intended for use by young children or infirm persons without supervision.
PARTS AND FEATURES This manual covers several different models. The washer you have purchased may have some or all of the parts and features listed below. A. Control panel E. Lid Other features your washer may have B. Model and serial number label F.
WASHER USE Loading suggestions Understanding Washer Cycles For these suggested full-sized loads, set the LOAD SIZE selector to the highest load size setting. When the washer lid is closed and the Cycle Control knob is set to a number or cycle and pulled out, the washer fills (to the SUPER CAPACITY™...
Starting Your Washer 2. (OPTIONAL) Pour measured liquid chlorine bleach into the WARNING liquid chlorine bleach dispenser (on some models). Bleach will be diluted automatically during the wash part of the cycle. Fire Hazard Never place items in the washer that are dampened Do not use more than 1 cup (250 mL) for a full load.
6. Set the TEMPERATURE selector to the correct setting for the To stop or restart your washer type of fabric and soils being washed. Use the warmest water To stop the washer at any time, push in the Cycle Control safe for fabric.
Cotton cycle 2. Pull out the Cycle Control knob. The washer fills to the selected load size, agitates, drains, and spins. This cycle features high-speed agitation followed by a brief period of low-speed agitation for cleaning cottons and linens. NOTE: An Extra Rinse option is available (on some models). See High spin speeds shorten drying time.
WASHER CARE Cleaning Your Washer Vacation, Storage and Moving Care Cleaning the exterior Install and store your washer where it will not freeze. Because some water may stay in the hoses, freezing can damage your Use a soft, damp cloth or sponge to wipe up any spills such as washer.
TROUBLESHOOTING First try the solutions suggested here and possibly avoid the cost of a service call... Washer won’t fill, rinse or agitate; washer stops Washer continues to fill or drain, or the cycle seems stuck Is the top of drain hose lower than the water level in WARNING washer? The top of the hose must be higher than the water level in the washer for proper operation.
Page 11
Is water deflecting off the tub ring or the load? Check the following: Center the tub before starting the washer. Was paper or tissue left in the pockets? The wash load should be balanced and not overloaded. The Did you use enough detergent? Follow manufacturer’s fill or spray rinses can deflect off the load.
Check to be sure the hot and cold water hoses are connected you still need help, contact the dealer from whom you purchased to the right faucets. See the Installation Instructions. the washer, or a Whirlpool designated service company. When calling, please know the purchase date and the complete Garment damage model and serial number of your appliance.