Siemens SIMATIC ET 200SP Manual page 13

Product overview
2.1 Properties
Properties
The module has the following technical properties:
● Digital output module with 8 outputs
● Source output (PNP, P-switching)
● Supply voltage L+
● Output current 0.5 A (per channel)
● Configurable diagnostics (per channel)
● Configurable substitute values (per channel)
● Suitable for solenoid valves, DC contactors, and indicator lights
● Safety-related shutdown
The module supports the following functions:
Table 2- 1 Version dependencies of the functions
Function
Firmware update
Identification data I&M0 to
I&M3
Configuration in RUN
PROFIenergy
Value status
Isochronous mode
Module-internal shared
input (MSI)
Configurable submod-
ule/submodules for shared
device
12
HW version FW ver-
sion
FS01 V1.0.0 or
higher
FS01 V1.0.0 or
higher
FS01 V1.0.0 or
higher
FS01 V1.0.0 or
higher
FS01 V1.1.0 or
higher
FS01 V1.1.0 or
higher
FS01 V1.2.0 or
higher
FS01 V2.0.0 or
higher
STEP 7
TIA Portal V5.x
V14 SP1 or V5.5 SP3 or
higher higher
V12 or higher V5.5 SP3 or
higher with
HSP 0230
V1.0 or higher
V12 or higher V5.5 SP3 or
higher
V14 SP1 or V5.5 SP3 or
higher higher
V14 SP1 or V5.5 SP3 or
higher higher with
HSP 0230
V2.0 or higher
V14 SP1 or V5.5 SP3 or
higher higher
V14 SP1 V13 V5.5 SP3 or
or higher higher
V14 SP1 or V5.5 SP3 or
higher higher
Digital output module DQ 8x24VDC/0.5A HF (6ES7132-6BF00-0CA0)
GSD file
PROFINET IO PROFIBUS DP
X X
X X
X X
X X
X X
X X
X X
X X
Manual, 12/2017, A5E03576680-AE