Establishing A Connection; Edit Device List - Siemens Synco 700 Series Basic Documentation

ACS Service
Note
Building Technologies
HVAC Products
5.1.3

Establishing a connection

If "Refresh device list?" is answered with "Yes", the connection is established
automatically, the device list is read and the reference data points are refreshed in
the devices.
Update the device list with
5.1.4

Edit device list

The following shows how to set a device address via ACS Service. It is assumed
that the user is familiar with ACS and how to use it.
In ACS Service select Plant > Edit device list... to open the "Edit device list" dialog box.
If the connection status is not already [State - Connected] , connection is established
automatically before the "Edit device list" dialog box is opened (see next page).
Basic documentation: Communication via the KNX bus
Device addresses via ACS
Yes Communication: Connected
35/120
CE1P3127en
30.08.2007