Securing The Paper Support/Paper Support Sub - Epson M200 Series Service Manual

M200 / M205 / M100 / M105 Series

5.3.2 Securing the Paper Support/Paper Support Sub

Purpose
To prevent damaging the Paper Support/Paper Support Sub by the shock during transportation.
Risks if it is not performed
The Paper Support/Paper Support Sub will be scratched and the abrasion powder will be produced due to the
shock during transportation.
Preparation
Prepare two pieces of strong tape
Multifunction Printer
1) Length: 60 mm, width: 22 mm, fold one end 5 ± 2 mm.
•
2) Length: 50 mm, width: 22 mm, fold one end 5 ± 2 mm.
•
Singlefunction Printer (3 tapes)
Length: 80 mm, width: 16 mm, fold one end 5 ± 2 mm.
•
Method
Multifunction Printer
1. Attach the strong tape 1) to the position on the following diagram A and secure the Paper Support Sub.
2. Attach the strong tape 2) to the position on the following diagram B and secure the Paper Support.
Diagram B
Figure 5-3. Securing the Paper Support/Paper Support Sub (Multifunction Printer)
Appendix
Strong tape
Paper Support
Protection for Transportation
Diagram A
Folded ends
Housing Left
Revision A
Paper Support Sub
Folded ends
84
Confidential