Zoom H6 Operation Manual page 214

Monitoring the input signals of speciied tracks (SOLO mode)
You can monitor the input signals of speciied tracks using SOLO mode.
1.
Press and hold the buttons of the tracks that you want
to monitor
The indicators for the selected track keys will light orange.
The input signals of the selected tracks will be output from the
PHONE and LINE OUT jacks.
NOTE
• SOLO mode can only be used with tracks that have input
signals (indicators lit red).
• To monitor L/R tracks (mic input), press and hold either the L
or the R button.
• Even when monitoring in SOLO mode, the inputs of tracks
that have names shown in red on the display are being
recorded.
06
HINT
• When monitoring, press and hold another track button to add
that track to the signals monitored.
• Even when monitoring in SOLO mode, the automatic
recording function will operate in response to the input levels
of all tracks.
2.
Press the button of a track being monitored to end
SOLO mode
The indicators for all tracks being input will light red, and the input
signals of other tracks will also be output.
HINT
You can also exit SOLO mode by pressing
settings screen and then returning to the Home Screen.
to open the