Connecting With Computer <Supplement> - Zoom H1 Quick Start Manual

Connecting with a computer <Supplement>
Connect
1.
With the power off, connect this unit to a Windows PC or a Macintosh us-
ing a USB cable.
2.
<To use as a MicroSD card reader>
Press while "CArd" is displayed.
<To use as an audio interface>
Press while "AUdIo" is displayed.
If no action is performed for 10 seconds, it will automatically
start working as a MicroSD card reader.
3.
<When "CArd" is selected>
It starts working as a MicroSD card reader.
<When "AUdIo" is selected>
When the screen to select the sampling frequency appears,
use / to select the frequency and press
The sampling frequency should be set to the same value
as the recording software and playback files.
4.
It starts working as an audio interface.
This unit's input signal is sent to the com-
puter, and you can use this unit to moni-
tor the playback signal on the computer.
1 Adjusts the output level
2 Switches on/off the LO CUT function
3 Switches on/off the AUTO level function
4 Adjusts the input level
5 Disables the keys
6 The playback signal of the computer can be monitored
when line/headphone output jack is not used.
function
in Ver.2
Displayed alternately at
one-second interval
/
.
1
2 3
Input/output level
New
Blink
Blink
4
5
6